METAPRESS-M Semi-automatic mounting press, 5 ton capacity (10,000 lbs). Touch pad front panel controls and digital display of heating time, molding temperature, cooling temperature, ram up/down, auto/manual cooling, cycle start/stop and a direct reading pressure gage. Self contained bench design, integral heating and cooling, force up to 4850 lbs, molding temperature 460°F (240°C), thermostatically controlled heating power of 1500 W, automatic cooling cycle and audiable warning signal for end of cycle. Last molding parameter settings retaind in memory. Selectable mold sizes from 1-inch to 1.5-inch diameter.

Semi-Automatic Press

Feature Specification Mount size 1 to 1.5-inch diameter Electrical Specification 110V / 60 Hz Heating Specification 1500 Watts Thermostat range Max 460°F (240°C) Pressure 4850 lbs Cooling system Water Dimensions (W x L x H) 13.4" x 17" x 23"

HYDROPRESS Automatic airless mounting press, fully automatic microprocessor controlled operation, touch pad front panel controls and digital display of heating time, molding temperature, cooling temperature, ram up/down, auto/manual cooling, cycle start/stop and a direct reading pressure gage. Molding pressure up to 4850 lbs force, molding temperature 460°F (240°C), thermostatically controlled heating power of 1500 W, automatic cooling cycle and audiable warning signal for end of cycle. Last molding parameter settings retaind in memory. Selectable mold sizes from 1-inch to 2-inch diameter.

Automatic Press

Feature Specification Mount size 1 to 2-inch diameter Electrical Specification 110V / 60 Hz Heating Specification 1400 Watts Thermostat range Max 460°F (240°C) Pressure 4850 lbs Cooling system Water Dimensions (W x L x H) 14.6 x 29" x 18"

METAPRESS-A Automatic mounting press, fully automatic microprocessor controlled operation, touch pad front panel controls and digital display of heating time, molding temperature, cooling temperature, ram up/down, auto/manual cooling, cycle start/stop and a direct reading pressure gage. Molding pressure up to 4850 lbs force, molding temperature 460°F (240°C), thermostatically controlled heating power of 1500 W, automatic cooling cycle and audiable warning signal for end of cycle. Last molding parameter settings retaind in memory. Selectable mold sizes from 1-inch to 2-inch diameter.

Automatic Press

Feature Specification Mount size 1 to 2-inch diameter Electrical Specification 110V / 60 Hz Heating Specification 1500 Watts Thermostat range Max 460°F (240°C) Pressure 4850 lbs Cooling system Water Dimensions (W x L x H) 14.6 x 29" x 18"

Copyright © 2004
Pace Technologies - 1802 W. Grant Rd. Suite 102 - Tucson, AZ 85745
Toll Free 888-PACE-654 FAX 520-882-6599
All Rights Reserved.
See our Important Disclaimers and Legal Information.

Email: PACE@metallographic.com