Terms of Use

By accessing, browsing, or using this Website, you acknowledge that you have read, understood, and agree to be bound by these Terms and all applicable laws and regulations. If you do not agree with any of these Terms, you are prohibited from using or accessing this Website.

We reserve the right to modify these Terms at any time without prior notice. Your continued use of the Website after any such changes constitutes your acceptance of the new Terms. It is your responsibility to review these Terms periodically for any updates.

This Website is owned and operated by PACE Technologies Corporation, a corporation engaged in the manufacture and distribution of metallographic equipment, consumables, and related products and services.

PACE Technologies provides this Website as an educational resource for the metallography community. The content, tools, and resources available on this Website are provided for informational and educational purposes only.

The content, guides, procedures, recommendations, tools, calculators, databases, and all other information provided on this Website (collectively, "Content") are intended solely for educational and informational purposes. The Content is provided as general guidance and suggestions based on industry practices and experience.

The Content on this Website does not constitute:

• Professional advice, consultation, or services
• Technical specifications or requirements for any specific application
• Warranties, guarantees, or representations of any kind
• Substitute for professional judgment, expertise, or training
• Approval, endorsement, or certification of any procedure, method, or technique

You acknowledge that metallographic sample preparation involves complex processes that may vary significantly based on material properties, equipment, environmental conditions, and specific application requirements. The Content provided is general in nature and may not be appropriate or suitable for your specific circumstances, materials, or applications.

THE CONTENT ON THIS WEBSITE IS PROVIDED "AS IS" AND "AS AVAILABLE" WITHOUT ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO:

• Warranties of merchantability, fitness for a particular purpose, or non-infringement
• Warranties that the Content is accurate, complete, reliable, current, or error-free
• Warranties that the Website will be available, uninterrupted, secure, or free from errors, viruses, or other harmful components
• Warranties regarding the results that may be obtained from using the Content
• Warranties that any defects or errors will be corrected

PACE Technologies makes no representation or warranty regarding the accuracy, completeness, reliability, suitability, or availability of any Content on this Website. The Content may contain technical inaccuracies, typographical errors, or outdated information. PACE Technologies reserves the right to make changes to the Content at any time without notice.

You expressly acknowledge and agree that:

• The use of any Content, procedures, methods, techniques, or recommendations from this Website is at your own risk
• You are solely responsible for evaluating the suitability, safety, and appropriateness of any Content for your specific application, materials, equipment, and circumstances
• You are solely responsible for ensuring compliance with all applicable laws, regulations, standards, and safety requirements
• You are solely responsible for obtaining proper training, certification, and professional guidance before attempting any metallographic procedures
• PACE Technologies is not responsible for any errors, omissions, or consequences resulting from your use of or reliance on the Content
• PACE Technologies is not responsible for any issues, problems, damages, injuries, or losses that may arise from following, implementing, or attempting to follow any advice, suggestions, procedures, methods, or recommendations contained in the Content

Metallographic procedures involve:

• Hazardous chemicals and materials that may cause injury, illness, or death if not handled properly
• Equipment that may cause injury if not used correctly
• Processes that may damage samples, equipment, or property if not performed correctly
• Results that may vary significantly based on numerous factors beyond our control

You assume all risks associated with the use of any Content from this Website, including but not limited to risks of personal injury, property damage, equipment failure, sample damage, and unsatisfactory results.

The Content on this Website should not be used as a substitute for professional judgment, expertise, or training. Metallographic sample preparation requires:

• Proper training and certification in metallographic techniques
• Understanding of material science, metallurgy, and sample preparation principles
• Knowledge of applicable safety regulations and requirements
• Experience with specific materials, equipment, and applications
• Ability to assess and adapt procedures based on specific circumstances
• Compliance with all applicable standards, regulations, and organizational requirements

You should consult with qualified professionals, review applicable standards and regulations, and exercise independent professional judgment before implementing any procedures or methods described on this Website.

You are solely responsible for:

• Ensuring all safety protocols, procedures, and regulations are followed
• Obtaining and reviewing Safety Data Sheets (SDS) for all chemicals and materials used
• Using appropriate personal protective equipment (PPE)
• Ensuring proper ventilation, containment, and disposal of hazardous materials
• Complying with all applicable local, state, federal, and international laws and regulations
• Complying with all applicable industry standards (e.g., ASTM, ISO, OSHA)
• Obtaining necessary permits, licenses, or approvals
• Ensuring proper training and certification of personnel
• Maintaining appropriate insurance coverage

PACE Technologies does not provide safety advice, compliance guidance, or regulatory consultation. You should consult with qualified safety professionals, regulatory experts, and legal counsel as appropriate for your specific circumstances.

This Website may contain links to third-party websites, resources, or content. PACE Technologies does not endorse, control, or assume responsibility for any third-party content, websites, products, or services. Your use of third-party websites and resources is at your own risk and subject to the terms and conditions of those third parties.

PACE Technologies is not responsible for the accuracy, completeness, legality, or availability of any third-party content or websites. The inclusion of any link does not imply endorsement by PACE Technologies.

All Content on this Website, including but not limited to text, graphics, logos, images, software, tools, databases, and compilations, is the property of PACE Technologies or its licensors and is protected by copyright, trademark, and other intellectual property laws.

You may access and use the Content for personal, non-commercial, educational purposes only. You may not:

• Reproduce, distribute, modify, create derivative works, publicly display, or publicly perform the Content without prior written permission from PACE Technologies
• Use the Content for commercial purposes without a license
• Remove any copyright, trademark, or other proprietary notices
• Use any automated systems or software to extract data from the Website

Some Content may be subject to additional terms and conditions. Certain standards, specifications, and reference materials may be subject to copyright by their respective organizations (e.g., ASTM, ISO). You are responsible for complying with all applicable intellectual property laws.

You agree not to use this Website in any manner that:

• Violates any applicable laws, regulations, or third-party rights
• Is harmful, threatening, abusive, harassing, defamatory, or otherwise objectionable
• Interferes with or disrupts the Website or servers
• Attempts to gain unauthorized access to any portion of the Website
• Introduces viruses, malware, or other harmful code
• Collects or harvests information about other users
• Impersonates any person or entity

PACE Technologies reserves the right to terminate or restrict your access to the Website at any time, without notice, for any reason, including violation of these Terms.

PACE Technologies reserves the right to modify, suspend, or discontinue any aspect of the Website at any time, including the availability of any Content, features, or tools, without notice or liability. PACE Technologies may also impose limits on certain features or restrict access to parts or all of the Website without notice or liability.

You agree to indemnify, defend, and hold harmless PACE Technologies Corporation, its affiliates, officers, directors, employees, agents, licensors, and suppliers from and against any and all claims, damages, obligations, losses, liabilities, costs, debts, and expenses (including but not limited to attorney's fees) arising from:

• Your use of or access to the Website
• Your violation of these Terms
• Your violation of any third-party rights
• Your use of any Content from the Website
• Any consequences resulting from your implementation of procedures, methods, or recommendations from the Website

These Terms shall be governed by and construed in accordance with the laws of the State of Arizona, United States, without regard to its conflict of law provisions. Any disputes arising from or relating to these Terms or the Website shall be subject to the exclusive jurisdiction of the state and federal courts located in Maricopa County, Arizona.

If any provision of these Terms is found to be invalid, illegal, or unenforceable, the remaining provisions shall continue in full force and effect. The invalid provision shall be modified to the minimum extent necessary to make it valid and enforceable.

These Terms constitute the entire agreement between you and PACE Technologies regarding your use of the Website and supersede all prior or contemporaneous communications, proposals, and agreements, whether oral or written, relating to the subject matter hereof.

If you have any questions about these Terms, please contact PACE Technologies at: